Adsorptive removal of micropollutants by natural and faujasite zeolites: Structural effect of micropollutants on adsorption.

To effectively characterize natural zeolite powder (ZP) and faujasite zeolite (FAU) as adsorbents to remove a wide variety of organic micropollutants, quantitative structure-activity relationship (QSAR) models for the adsorption of zeolites were developed. For this purpose, batch isotherms were performed to measure the adsorption affinity (Kd) between zeolite and organic micropollutants, and the measured Kd values were used as a dependent variable in the QSAR modeling. In the modeling, the concept of a linear free energy relationship (LFER) was employed and used either empirically measured or in silico calculated descriptors. Modeling results based on empirical descriptors showed that log Kd values for ZP could be predicted with R2 = 0.949 and standard error (SE) = 0.137 log units, and for FAU, R2 = 0.895 and SE = 0.144 log units. A test set was used to validate the models developed by the training set. The predictabilities of the models for the test set were R2 = 0.907 and SE = 0.209 log units for ZP and R2 = 0.784 and SE = 0.236 log units for FAU, indicating that the models have reasonable robustness and predictability. Also, we showed that in silico-based descriptors could be applied to the prediction. These findings may help determine the general coverage of ZP and FAU zeolites and identify suitable applications.

Investigation of the adsorption affinity of organic micropollutants on seaweed and its QSAR study.

Seaweed, one of the most abundant biomaterials, can be used as a biosorbent to remove organic micropollutants. In order to effectively use seaweed to remove a variety of micropollutants, it is vital to rapidly estimate the adsorption affinity according to the types of micropollutants. Thus, the isothermal adsorption affinities of 31 organic micropollutants in neutral or ionic form on seaweed were measured, and a predictive model using quantitative structure-adsorption relationship (QSAR) modeling was developed. As a result, it was found that the types of micropollutants had a significant effect on the adsorption of seaweed, as expected, and QSAR modeling with a predictability (R2) of 0.854 and a standard error (SE) of 0.27 log units using a training set could be developed. The model's predictability was internally and externally validated using leave-one-out cross validation and a test set. Its predictability for the external validation set was R2 = 0.864, SE = 0.171 log units. Using the developed model, we identified the most important driving forces of the adsorption at the molecular level: Coulomb interaction of the anion, molecular volume, and H-bond acceptor and donor, which significantly affect the basic momentum of molecules on the surface of seaweed. Moreover, in silico calculated descriptors were applied to the prediction, and the results revealed reasonable predictability (R2 of 0.944 and SE of 0.17 log units). Our approach provides an understanding of the adsorption process of seaweed for organic micropollutants and an efficient prediction method to estimate the adsorption affinities of seaweed and micropollutants in neutral and ionic forms.

Modeling for the estimating the adsorption property of fruit waste-based biosorbents for the removal of organic micropollutants.

The enormous production of fruit waste and the generation of countless organic micropollutants are serious environmental problems. To solve the problems, the biowastes, i.e., orange, mandarin, and banana peels, were used as biosorbents to remove the organic pollutants. In this application, the difficult challenge is knowing the degree of adsorption affinity of biomass for each type of micropollutant. However, since there are numerous micropollutants, it requires enormous material consumption and labor to physically estimate the adsorbability of biomass. To address this limitation, quantitative structure-adsorption relationship (QSAR) models for the adsorption assessment were established. In this process, the surface properties of each adsorbent were measured with instrumental analyzers, their adsorption affinity values for several organic micropollutants were determined through isotherm experiments, and QSAR models for each adsorbent were developed. The results showed that the tested adsorbents had significant adsorption affinity for cationic and neutral micropollutants, while the anionic one had low adsorption. As a result of the modeling, it was found that the adsorption could be predicted for a modeling set with an R2 of 0.90-0.915, and the models were validated via the prediction of a test set that was not included in the modeling set. Also, using the models, the adsorption mechanisms were identified. It is speculated that these developed models can be used to rapidly estimate adsorption affinity values for other micropollutants.

Adsorption of organic micropollutants on yeast: Batch experiment and modeling.

Yeast is ubiquitous and may act as a solid phase in natural aquatic systems, which may affect the distribution of organic micropollutants (OMs). Therefore, it is important to understand the adsorption of OMs on yeast. Therefore, in this study, a predictive model for the adsorption values of OMs on the yeast was developed. For that, an isotherm experiment was performed to estimate the adsorption affinity of OMs on yeast (i.e., Saccharomyces cerevisiae). Afterwards, quantitative structure-activity relationship (QSAR) modeling was performed for the purpose of developing a prediction model and explaining the adsorption mechanism. For the modeling, empirical and in silico linear free energy relationship (LFER) descriptors were applied. The isotherm results showed that yeast adsorbs a wide range of OMs, but the magnitude of Kd strongly depends on the types of OMs. The measured log Kd values of the tested OMs ranged from -1.91 to 1.1. Additionally, it was confirmed that the Kd measured in distilled water is comparable to that measured in real anaerobic or aerobic wastewater (R2 = 0.79). In QSAR modeling, the Kd value could be predicted by the LFER concept with an R2 of 0.867 by empirical descriptors and an R2 of 0.796 by in silico descriptors. The adsorption mechanisms of yeast for OMs were identified in individual correlations between log Kd and each descriptor: Dispersive interaction, hydrophobicity, hydrogen-bond donor, and cationic Coulombic interaction of OMs attract the adsorption, while the hydrogen-bond acceptor and anionic Coulombic interaction of OMs act as repulsive forces. The developed model can be used as an efficient method to estimate OM adsorption to yeast at a low level of concentration.

Adsorption modeling of microcrystalline cellulose for pharmaceutical-based micropollutants.

Cellulose can be considered as a raw material for the production of filters and adsorbents for the removal of micropollutants, particularly in pharmaceutical-based products. To study its applications, it is important to estimate the adsorptive interaction of cellulose with the targeted chemicals, and develop predictive models for the expandable estimation into various types of micropollutants. Therefore, the adsorption affinity between cellulose and micropollutants was measured through isotherm experiments, and a quantitative structure-adsorption relationship model was developed using the linear free energy relationship (LFER) equation. The results indicate that microcrystalline cellulose has a remarkably high adsorption affinity with cationic micropollutants. Moreover, it has interactions with neutral and anionic micropollutants, although they have relatively lower affinities than those of cations. Through a modeling study, an LFER model - comprising of excess molar refraction, polar interaction, molecular volume, and charge-related terms - was developed, which could be used to predict the adsorption affinity values with an R2 of 0.895. To verify the robustness and predictability of the model, internal and external validation studies were performed. The results proved that the model was reasonable and acceptable, with an SE = 0.207 log unit.